2 diy router sled using plywood this plan outlines the steps you need to take to build a router sled using plywood. Step 3.
Cnc spoilboard surfacing router bit 1 2 shank slab flattening router bit carbide planer router bits wood milling cutter planing tool woodworking tools by nitomak 4 6 out of 5 stars 326 31 76 31.
Router planing sled. While my first couple of router sled designs worked fine they were a little bulky and they also began to slightly warp over time which resulted in a not so smooth or even finish on the wood that i was trying to level. Add 1 32 to this measurement to allow just enough room to prevent binding when the router moves across the sled. Now find the maximum thickness.
3 tall ultra track aluminum rails support the router and won t deflect as you move the router back and forth over the stock. For the big ol slabs step 1 router base guide. When making your passes over the material the last thing you want to have is flex in the middle to.
This is definitely one of the easiest builds i ve completed but with one of the biggest. These wood slabs are on the smallish side. Diy router sled tutorial.
27 wide maximum capacity 36 ultra track rails 16 double track rails. Figure out the maximum thickness of the slab. The slab flattening mill pro is able to mill slabs and boards as thin as and as thick as 3 3 8.
Next cut out the sled sides. Router bit not included. Measure your wood slabs maximum width and length.
Plane your wood slabs with a planing sled that you build step 1. So i wanted to. The slab flattening mill can mill slabs up to 3 7 16 and the minimum thickness depends on the travel of the router and length of the blade.
Afterall a routing sled is simply an adjustable sturdy rail that secures and guides your router as it slides back and forth over a piece of wood. The slab flattening mill can mill boards up to 40 in width and 58 in length. Cutting the bottom of the sled carriage to cut the bottom of the sled use your router s base to set the width of the cut.
Step 2 no flex. Using your plunge router and a dado bit pic 1 plunge your router into your sled to begin routing a groove pic 2. Once you have made multiple passes and cut all of the way through you should end up with a groove pic 3 that you can now pass your dado bit through and surface any piece of wood etc.
If you are familiar with woodworks then you. Our planing sled is an affordable solution for surfacing or milling live edge slabs wide stock butcher blocks or workbenches removing a finish from a surface and other jobs impossible for a planer. 9 homemade router sled plans you can diy easily 1 diy router sled for big slabs this is probably one of the easiest diy.
That you place under the sled. Start with your wood slabs.