Measure your wood slabs maximum width and length. Attach sled to router.
2 diy router sled using plywood this plan outlines the steps you need to take to build a router sled using plywood.
Router planing sled diy. In many of my past live edge woodworking videos i demonstrate how you can level out an uneven piece of wood sometimes very large pieces of wood with a routing sled as one of the first steps to getting it ready for a project. Start with your wood slabs. I made mine 3 high.
For the big ol slabs step 1 router base guide. Rails on workbench or on work. In this video i make super fast and simple router flattening sled for a combo build with mike montgomery from modern builds.
Diy router sled planing flattening leveling live edge wood. These wood slabs are on the smallish side. Almost every hand router will have a removable base plate.
Next cut out the sled sides. At the drill press drill two 1 1 2 holes at either end of the sled bottom. Remove router base plate.
I used my circle saw and track but you can use a table saw as well. Add 1 32 to this measurement to allow just enough room to prevent binding when the router moves across the sled. Diy router sled tutorial.
Now find the maximum thickness. The width of this should be the width of the base plate on your router plus 1 4. Now you will cut the center out of the 33 x 6 1 4 piece of plywood.
When making your passes over the material the last thing you want to have is flex in the middle to. This is definitely one of the easiest builds i ve completed but with one of the biggest. Step 3.
Using your plunge router and a dado bit pic 1 plunge your router into your sled to begin routing a groove pic 2. Router plates are usually held on by screws that are. So i wanted to.
If you are familiar with woodworks then you. Once you have made multiple passes and cut all of the way through you should end up with a groove pic 3 that you can now pass your dado bit through and surface any piece of wood etc. If you have access to a large industrial planer or don t mind coughing up a pretty big chunk of cash to have a professional lumber mill operation level and flatten out a large slab of wood for you.
9 homemade router sled plans you can diy easily 1 diy router sled for big slabs this is probably one of the easiest diy. To cut the bottom of the sled use your router s base to set the width of the cut. Step 2 no flex.
Plane your wood slabs with a planing sled that you build step 1. Start by cutting the plywood pieces to size. That you place under the sled.
Figure out the maximum thickness of the slab.